Introduction
This chapter describes how to configure the basic system parameters on the scanner.
Restore Factory Defaults
Operating Modes
The scanner provides two operating modes: Real-Time mode (Bluetooth mode) and Batch mode.
1. Real-Time mode
When the scanner is in the Real-Time mode, scanning the following barcodes can switch between
Bluetooth HID and SPP profiles. When the scanner is in the Batch mode, scanning the following barcodes
can switch between USB HID-KBW and USB COM Port Emulation.
Real-Time Mode: HID (default)
Batch Mode: USB HID-KBW (default)
11
Chapter 2 System Settings
Restore Factory Defaults
Real-Time Mode (default)
Real-Time Mode: SPP
Batch Mode: USB COM Port Emulation