Newland NLS-HR3290 User Manual page 162

Decode Session Timeout
Image Stabilization Timeout
Operation after Good Read
Sense Mode
Timeout between Decodes
Timeout between Decodes
(Same Barcode)
Threshold Value of Illumination Change
Decode Session Timeout
Continuous Mode
Timeout between Decodes
Timeout between Decodes
(Same Barcode)
Scanning Preferences
Decode Area
Specify Decoding Area
Illumination & Aiming
Illumination
Aiming
Beep & LED Notifications
Startup Beep
Notification
Good Read Beep for
Non-Programming Beep Type
Barcode Beep Volume
Good Read Beep for Programming Barcode
Good Read LED
NGR (Not Good Read) Message
Parameter Factory Default
3,000ms
500ms
Pause after good read
1000ms
Disabled
1,500ms
2
3,000ms
1000ms
Disabled
1,500ms
Whole Area Decoding
40% top, 60% bottom,
40% left, 60% right
Normal
Normal
Enabled
Enabled
Type 3
Loud
Enabled
Enabled
Do not transmit
None
Remark
Applicable to Manual mode, Sense
mode, Continuous mode.
100~3,600,000ms
0~1,600ms
Applicable to Sense mode,
Continuous mode.
0~65,535ms
0~65,535ms
1~20
Applicable to Manual mode, Sense
mode, Continuous mode.
100~3,600,000ms
Applicable to Sense mode,
Continuous mode.
0~65,535ms
0~65,535ms
150