Appendix 5: Parameter Programming Examples; Program The Decode Session Timeout; Program The Time Period From Idle To Sleep; Program The Image Stabilization Timeout - Newland NLS-HR3290 User Manual

Appendix 5: Parameter Programming Examples

The following examples show you how to program parameters by scanning programming barcodes.
a. Program the Decode Session Timeout
Example: Set the decode session timeout to 1500ms
1. Scan the Enter Setup barcode.
Scan the Decode Session Timeout barcode. (See the "Decode Session Timeout" section in Chapter
2.
3)
Scan the numeric barcodes "1", "5", "0" and "0".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
b. Program the Time Period from Idle to Sleep
Example: Set the time period from idle to sleep to 500ms
1. Scan the Enter Setup barcode.
Scan the Time Period from Idle to Sleep barcode. (See the "Auto Sleep" section in Chapter 3)
2.
Scan the numeric barcodes "5", "0" and "0".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
c. Program the Image Stabilization Timeout
Example: Set the image stabilization timeout to 500ms
1. Scan the Enter Setup barcode.
Scan the Image Stabilization Timeout barcode. (See the "Image Stabilization Timeout" section in
2.
Chapter 3)
Scan the numeric barcodes "5", "0" and "0".
3.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
165