Enter Setup
Custom Transmit Delay per Character: This parameter is programmable in 5ms increments from 0ms
to 75ms. To set it, scan the Custom Transmit Delay per Character barcode and two numeric barcodes
that represent a desired value. Single-digit values must have a leading zero. See Appendix 5 for more
information. The default value is 70ms.
Custom Transmit Delay per 12 Characters: To set this parameter, scan the Custom Transmit Delay
per 12 Characters barcode and a numeric barcode (0-7, which represent 0ms, 300ms, 400ms, 500ms,
600ms, 700ms, 800ms and 900ms, respectively). See Appendix 5 for more information. The default
value is 500ms.
Custom
Transmit Delay per Character
Custom Transmit Delay per 12 Characters
** Exit Setup
86