Enter Setup
USB Interface
USB Enumeration
If the scanner is connected to the host defice via a USB connection, the scanner will be enumerated
using S/N or "00000000" after power-up. Enumeration using S/N enables the host device to distinguish
even between scanners of same model. Enumeration using "00000000" disables the host device from
distinguishing between scanners of same model.
** Enumeration Using "00000000"
Enumeration Using S/N
USB HID-KBW
When you connect the scanner to the host device via a USB connection, you can enable the USB
HID-KBW feature by scanning the barcode below. Then scanner's transmission will be simulated as USB
keyboard input. The host device receives keystrokes on the virtual keyboard. It works on a Plug and Play
basis and no driver is required.
**
USB HID-KBW
** Exit Setup
18