R&S NRP P Series User Manual page 73

®
R&S NRPxxP
●
Choose a larger width for the level range using
SCALe:X:RANGe.
Usage:
8.6.6.5 Configuring the scale
Set the level range and its resolution in pixels for the measurement result. For each
pixel, the selected function, CCDF or PDF, is output in W
SENSe<Sensor>:STATistics:SCALe:X:POINts
SENSe<Sensor>:STATistics:SCALe:X:RANGe
SENSe<Sensor>:STATistics:SCALe:X:RLEVel
SENSe<Sensor>:STATistics:SCALe:X:POINts <points>
Sets the resolution of the measurement result. The defined number of pixels is
assigned to the logarithmic level range, set by
SCALe:X:RANGe.
Parameters:
<points>
SENSe<Sensor>:STATistics:SCALe:X:RANGe <range>
Sets the level range width of the measurement result.
The level range width divided by N–1, where N is the number of pixels, has to equal at
least the highest attainable level resolution, queried by
STATistics:SCALe:X:MPWidth?. N is the number of pixels, set by
SENSe<Sensor>:STATistics:SCALe:X:POINts.
Parameters:
<range>
SENSe<Sensor>:STATistics:SCALe:X:RLEVel <rlevel>
Sets the lower limit for the level range of the measurement result.
This level can be assigned to the first pixel. The level assigned to the last pixel is equal
to the level of the first pixel plus the level range.
Parameters:
<rlevel>
User Manual 1179.5760.02 ─ 02
Query only
.................................................................... 73
....................................................................73
....................................................................73
Range: Depends on the number of pixels.
*RST: 200.0
Range: Depends on the highest attainable level resolution.
*RST: 50.0
Default unit: dB
Range: Depends on the level range.
*RST: -30.0
Default unit: dBm
Remote control commands
Configuring the measurement modes
SENSe<Sensor>:STATistics:
-1 .
SENSe<Sensor>:STATistics:
SENSe<Sensor>:
73