Sre; Stb; Trg; Tst - R&S NRP P Series User Manual

®
R&S NRPxxP
Setting parameters:
<number>
Usage:
*SRE <register>
Service request enable
Sets the service request enable register to the specified value. This command deter-
mines under which conditions a service request is triggered.
Parameters:
<register>

*STB?

Status byte
Returns the contents of the status byte in decimal form.
Usage:

*TRG

Trigger
Triggers a measurement if the following conditions are met:
●
Power sensor is in the waiting for trigger state.
●
Trigger source is set to BUS.
See
Usage:

*TST?

Selftest
Triggers a selftest of the R&S NRPxxP and outputs the result. 0 indicates that no
errors have occurred.
Usage:

*WAI

Wait to continue
Prevents the execution of the subsequent commands until all preceding commands
have been executed and all signals have settled.
User Manual 1179.5760.02 ─ 02
Range:
*RST:
Setting only
Range:
*RST:
Query only
TRIGger:SOURce BUS.
Event
Query only
Remote control commands
0 to 9
0
0 to 255
0
Common commands
38