Table of Contents
Advertisement
®
R&S
NRPxxP
If the pulse period, and thus the duty cycle, cannot be determined, NaN for "not a num-
ber" is returned.
Usage:
SENSe<Sensor>:TRACe:MEASurement:TRANsition:POSitive:OCCurrence?
Queries the time when the signal passes through the medial reference power level with
rising edge, referenced to the delayed trigger event. Indicates the start point of the first
power pulse within the analysis window.
Usage:
SENSe<Sensor>:TRACe:MEASurement:TRANsition:SPERiod?
Queries the number of samples per second.
Usage:
8.9.5.2
Power-related pulse analysis results
Remote commands:
SENSe<Sensor>:TRACe:MEASurement:POWer:AVG?
SENSe<Sensor>:TRACe:MEASurement:POWer:AVG?
Queries the average power during the time in which the pulse is active.
Usage:
User Manual 1179.5760.02 ─ 02
Query only
Query only
Query only
Query only
Remote control commands
Querying measurement results
..................................................... 103
......................................... 104
..........................................104
..................................................... 104
...................................................... 104
........................................ 104
...................................... 105
.......................................... 105
............................................105
...................... 105
........................105
103
Advertisement
Chapters
Table of Contents
