Moving The Markvision Server - Lexmark MarkVision Professional User Manual

Moving the MarkVision Server

As newer hardware becomes available, it may become necessary to move the MarkVision
Professional Server to another machine. Since MarkVision Professional is extremely customizable,
you may not want to repeat the process of creating folders, filters, and rediscovering devices. The
following steps describe a method of creating a backup of MarkVision Professional's customized
data, and integrating that data onto a new machine.
1
Stop the MarkVision Server.
2
Back up the directory in which the customized data files are stored.
• In Windows, the default directory is: C:\Program Files\Lexmark\MarkVision
Server\granite\data
• For UNIX, the default directory is: /var/spool/markvision/data
• For Macintosh, the default directory is: /var/spool/markvision/data
3
Install the MarkVision Server on the new machine.
4
Stop the MarkVision Server.
5
Replace the data files saved in step 2 into the same locations on the new machine.
6
Restart the MarkVision Server.
Note: The files listed above do not contain settings for window and frame sizes or
positional information.
Starting and stopping the MarkVision Professional Server on a Windows system
For Windows 2000:
1
Go to Control Panel
Server.
2
Click Start/Stop.
Note: You can use the same process to start or stop the MarkVision Web service.
For Windows NT:
1
Go to Control Panel
2
Click Start/Stop.
Note: You can use the same process to start or stop the MarkVision Web service.
Administrative Tools
Services and select the MarkVision Server.
Moving the MarkVision Server
63
Services and select the MarkVision