Lexmark MarkVision Professional User Manual page 19

5
Install either all or individual MarkVision components:
• To install all MarkVision components, issue the command:
rpm -irh *.rpm
• To install individual MarkVision Professional components, specify the file name of the
MarkVision Professional component that you want to install. For example, to install just
the MarkVision Professional Server, issue the command:
rpm -irh markvision-pro-MVJserver-*.i386.rpm
6
Type the following on the command line and answer any questions that appear:
/usr/local/lexmark/setup.mvjserver
Solaris SPARC systems
1
Download the MVP package file from the Lexmark Web site and place the package file in the
/tmp directory.
2
Start the package installation program:
pkgadd -d /tmp/markvision-pro-solaris2-sparc.pkg
3
When a list of available packages appears:
a If you want to install all the packages, type all and then press Enter.
b If you want to install individual packages, type each package number separated by a
comma and then press Enter. For example: 1,2,3.
4
Follow the prompts and answer any questions that appear on the screen:
a To accept the defaults, press Enter.
b To answer yes/no questions, type y, n, or ?, and then press Enter.
c When a message appears telling you the installation was successful, type q to quit.
Note: You must install all the packages in the same location.
5
Type the following on the command line and answer any questions that appear:
/opt/local/lexmark/setup.mvjserver
Unix general file locations
MarkVision Application
/usr/mvp/bin (executable files)
/usr/mvp/etc (configurable files)
/usr/mvp/lib (archive/library (JAR) files)
Installing MarkVision Professional
19