Lexmark MarkVision Professional User Manual page 23

After removing all the previously mentioned MarkVision packages (if one or more were installed),
some directories may need to be removed manually.
To see if any directories remain after removing all the MVP packages, check the directory where you
installed MarkVision. By default, MVP installs in either /opt/lexmark/ or /usr/local/lexmark/.
Installing MarkVision Professional into CDE
You can integrate MVP into the Common Desktop Environment (CDE). Integrating installs CDE
icons, actions, and online Help.
To integrate MarkVision Professional into the CDE:
1
Make sure you have root user authority.
2
Type the following in the command line:
/usr/bin/mark2cde
On some CDE systems, the MarkVision Professional CDE icons may not appear after installing the
MarkVision Professional CDE snap-in. The icons appear after logging out and logging back in again.
If you encounter problems while running mark2cde manually, try running it again using the Korn shell
(ksh) rather than the Bourne shell (sh).
Removing the MarkVision Professional CDE:
When removing the MarkVision Professional client package, you must manually remove the CDE
snap-in.
To uninstall the CDE snap-in, as root, type the following in the command line:
# /usr/bin/mark2cde -d
Installing MarkVision Professional into KDE
You can integrate MVP into the K Desktop Environment (KDE). Integrating installs KDE icons,
actions, and online Help.
To integrate MarkVision Professional into the KDE:
1
Make sure you have root user authority.
2
Type the following in the command line:
/usr/bin/mark2kde
You must restart KDE after installing the KDE snap-in to see the icons.
If you encounter problems while running mark2kde manually, try running it again using the Korn shell
(ksh) rather than the Bourne shell (sh).
Installing MarkVision Professional
23