Lexmark MarkVision Professional User Manual page 22

c Export the directory where you installed the MarkVIsion Professional UNIX Client. For
example: /opt/lexmark/ or /usr/local/lexmark/
2
Configure MarkVIsion Professional on the local workstation.
a Make sure you're logged on with root user authority.
b NFS mount the MarkVision Professional directory from the server (Refer to your operating
system documentation for mounting instructions).
c Run the install script in the mounted MarkVision Professional directory. The script creates
symbolic links to this directory in /usr/mvp. The following example uses /mnt as the
mount point.
cd /mnt/lexmark
./MVJclient.link
To uninstall the MarkVision Professional UNIX Client
1
Run the uninstall script which removes the symbolic links to the mounted directory from /usr/
mvp.
./MVJclient.unlink
2
Unmount the MarkVision Professional directory. Refer to your operating system
documentation for unmounting instructions.
Removing MarkVision Professional packages
With root authority, you can remove MarkVision Professional using these utilities:
Depending on the utility on your system, either mark the packages for removal after you start the
program, or provide the names of the packages you want to remove in the command line. Refer to
your operating system documentation for more information.
Removing remaining directories
Package removal utilities usually do not remove directories shared by more than one package. The
following two software packages share the same directory structure (install-directory>markvision)
• Enhanced Printer Drivers
• MarkVision Professional
Operating system
HP-UX
IBM AIX
RedHat; SuSE Linux
Sun Solaris SPARC
Installing MarkVision Professional
Package removal tool
sam
smit
rpm -e
pkgrm
22