How Do I Create A Filter And Apply It To A Folder - Lexmark MarkVision Professional User Manual

• When multiple devices are selected, and one or more of them do not support the current task,
either of the following occurs:
– For read-only tasks (such as status and toner levels), MarkVision Professional displays
the Device Incapable of Task message in place of the task information for that
device. All supported devices have their appropriate information displayed.
– For multi-device configuration tasks, MarkVision Professional warns you that some of the
devices will not be affected by the task because they do not support the function or
feature that is being configured.

How do I create a filter and apply it to a folder?

Filters provide an easy way to view devices of a certain type or status.
Create a filter
1
From the menu bar, select MarkVision
2
Click New.
3
Give your filter a meaningful name.
4
Under the Name dialog box, select either Basic or Advanced.
• If you select Basic
Select the filter conditions. If you select more than one condition, you can specify whether
a device must meet any or all conditions in order to be included in the folder. If All is
selected, a device must meet all conditions. If Any is selected, a device must meet at least
one condition to be included in the folder.
• If you select Advanced
You can create conditions by first selecting a parameter, then selecting a logical
operation, and then selecting or typing in a value.
For example, if you wanted to "filter out" all color printers, you would:
1 From the parameter box, select Color.
2 From the operation box, select Equal To.
3 From the value box, select Monochrome.
Likewise, if you wanted to "filter in" all printers with Job Timeouts greater than or equal to
90 seconds, you would:
1 From the parameter box, select Job Timeout.
2 From the operation box, select Greater Than Or Equal To.
How do I create a filter and apply it to a folder?
Filters. The Filter Creation window appears.
103