Getting Started - Lexmark MarkVision Professional User Manual

For example, to appear to install MarkVision Professional in /disk2/lexmark, do the following:
1
Create a directory in the location where you want the packages to be installed. For example,
to install the /disk2 file system:
mkdir /disk2/lexmark
2
Create a symbolic link pointing to the directory you created. For example:
ln -s /disk2/lexmark /opt/lexmark
Upgrading from previous versions of MarkVision
Prior versions of MarkVision for Windows are easily upgraded by running the installation program. All
prior folders, filters, devices, and so on are retained with the new version. If you are upgrading from
an earlier release of MarkVision Professional for Unix systems, make sure you upgrade your
MarkVision clients and server(s) together.
Note: When upgrading MarkVision Professional for Unix systems, you should remove the
currently installed package, as well as the saved configuration. These files are
stored in /var/spool/markvision. Remove all files except the vir_queues and
vir_devices directories. Removing these directories will break any existing print
queue created with Enhanced Printer Drivers (MV Print).
For versions earlier than MarkVision Professional 6.0, such as MarkVision for Intranets, or classic
MarkVision, We recommend that you uninstall the old version before attempting a new installation.
To export devices from classic MarkVision:
1
In Classic MarkVision, under the Configure - TCP/IP option, click the Manage Print Server
List button. Then, click Export to File.
2
Enter the location where you want the file stored.
3
Once you have exported the file, you need to edit the file to accommodate the current MVP
format. Configure the file path to match the following naming convention:
IP <Ip address or hostname> <read community name> <write community name>
4
Install your new version of MVP 10.1, and then click Load in the Device Discovery task.
5
Select your updated file. Click OK. The list is imported for discovery.

Getting started

When you open MarkVision Professional for the first time, select the server you want to use. Enter
the computer/hostname or IP address of the Machine running the MarkVision Server or click Browse
to locate it, and then click Connect.
After the setup wizard appears, use the steps outlined in the wizard to:
Getting started
25