Adding Devices - Lexmark MarkVision Professional User Manual

Adding devices

In some situations you may want to discover some devices without creating a profile. In these
situations you can use the Add Devices task to discover individual or small groups of devices.
To use the Add Devices task:
1
Select Add Devices from the All Tasks menu, or select MarkVision
Add Devices on the MVP Home screen.
2
Select a specific device or devices from the list of existing devices on the screen, or click Add
to enter a new device address, and then click OK.
3
Click Start to begin the discovery.
You can also select the Exclude tab to select devices from an existing profile that you do not want to
include in the discovery.
Select the Advanced tab to reset additional discovery settings.
Note: You can save any new groups of devices that you establish with the Add Devices
task as a new discovery profile by clicking Save as Profile.
Device discovery results
After you have performed a device discovery, you can view the discovery's results. You can access
device discovery results under MarkVision
You can filter the results both by date and device discovery profile. When the Dialog Discovery
Results dialog box appears, enter the run date when the discovery was performed, and select the
discovery profile. The discovery results contain a header, a range of discoveries, and a summary
displaying the "devices not found."
Removing devices from the server
If there are any devices that you no longer want to associate with your network, and that you do not
want to include in any subsequent discoveries, you can remove them from the server's list of
managed devices with the Remove Devices task. The Remove Devices task is available by clicking
the Remove Devices icon, located between the navigation buttons and the frequent task icons on
the MVP toolbar, in the MarkVision menu under Device Discovery
(Advanced), or by selecting Remove Devices (Advanced) under the All Tasks menu.
To remove devices from the MarkVision Server, browse the existing device folders or use the Quick
Find feature to locate the devices that you want to remove. When you have selected all of the
appropriate devices, click the Remove icon on the MarkVision taskbar. The selected devices are
removed from the MarkVision Server.
Device Discovery
Adding and removing devices
39
Device Discovery
Device Discovery Results.
Remove Devices