Table of Contents
Advertisement
Chapter 3: Programming the IDT Clock Chip
48
Downloaded from
Elcodis.com
electronic components distributor
X-Ref Target - Figure 3-2
Figure 3-2: Programming the IDT5V9885 on the Spartan-3A DSP 3400A
5.
Right-click the device and select Execute XSVF/SVF.
6.
To finish programming the chip, cycle the power by turning off the board power
switch.
7.
After turning the board back on, verify that the clock frequencies are correct.
www.xilinx.com
Edition Board Using iMPACT
Spartan-3A DSP 3400A Edition User Guide
UG498 (v2.2) November 17, 2008
R
Advertisement
Table of Contents
