Xilinx XtremeDSP Spartan-3A DSP 3400A HW-SD3400A-DSP-DB-UNI-G User Manual page 37

R
Spartan-3A DSP 3400A Edition User Guide
UG498 (v2.2) November 17, 2008
Downloaded from Elcodis.com electronic components distributor
Table 1-25: Configuration Modes (Cont'd)
Configuration Mode Configuration Source
SLAVE SELECTMAP CONFIG FROM
XCF32P FLASH
SLAVE SERIAL CONFIG FROM
XCF32P FLASH
34. CPLD
Xilinx XC2C64A CoolRunner-II. This device is designed for high-performance and
low-power applications. The CPLD is used to configure the Spartan-3A DSP 3400A
Edition board and to provide statuses through the status LEDs (below).
35. Status LEDs
The status LEDs are driven by the CPLD to provide statuses on the Spartan-3A DSP
3400A Edition board.
Table 1-26: Status LED Signals
LED
DS6 DONE
DS7 INIT
DS8 EXTRA_LED_2
DS9 EXTRA_LED_1
36. Audio Input Output Connectors
Microphone, line in, line out, and headphones connectors. All connectors are stereo
with the exception of the microphone connector.
Table 1-27: Audio Connectors
Connector
J8 Microphone - In
J9 Analog line - In
J10 Analog line - Out
J11 Headphones - Out
J20 S/PDIF - Out (see no. 29)
www.xilinx.com
Spartan-3A DSP 3400A Edition Board Hardware
Mode [2]
Signal Description
Status of the FPGA DONE signal
Status of the FPGA INIT signal
Not used
Not used
Function
Mode [1] Mode [0]
1 1 0
1 1 1
37