3M -Matic 7000a-I Instructions And Parts List page 149

Operation
(continued)
Figure 3-4
Place tape roll on tape drum to
dispense tape with adhesive side
forward. Seat tape roll fully against
back flange of drum. Adhere tape
lead end to threading needle as
shown.
Manually turn tape roll to create
slack tape while pulling threading
needle through tape applying
mechanism until needle is through
and tape is in alignment with
applying roller.
Excess tape can be cut with a
scissors at applying roller.
3M-Matic Accuglide 3 - 3 Inch Taping Head
™
Page 11
44-0009-2071-8 / ECO# 0078045
Figure 3-4 Tape Loading/Threading
Figure 3-5 Tape Loading/Threading
Original Instructions
Source Document for all related Manuals/Translations
Warning
• To reduce the risk associated with
sharp blade hazards:
- Keep hands and fingers away from
tape cutoff blades under orange blade
guards. The blades are extremely sharp.
International - ENG
February 2021