Theory Of Operation; Working Cycle Description; Running Mode Definition; Normal Stop Procedure - 3M -Matic 7000a-I Instructions And Parts List

8. Theory of Operation

8.1 Description of the Working Cycle
After having closed the top flaps of
the carton, the operator pushes it
under the top infeed end in order to
avoid the opening of the top flaps.
Further pushing causes the two
top and bottom belts to drive the
box through the taping heads
which automatically seal the top
and bottom seams. The carton is
then expelled on the exit conveyor.
8.2 Definition of Running Mode
The case sealer 7000a-I / 7000a3-I
Pro
has only one (automatic) operating
mode:
- The EMERGENCY STOP
- The main On/Off switch

8.3.1 Normal Stop Procedure

8.3.2 Emergency Stop

(Figure 8-3).
3M-Matic 7000a-I / 7000a3-I Pro - Type 11700
™
Page 22
44-0009-2164-1 / ECO# 0078045
BUTTON unlocked (Figure 8-1)
"ON" (I) (Figure 8-2)
When the main switch is turned
OFF (O), the machine stops
immediately at any point of the
working cycle. The same thing
happens in case of electrical
failure or when the machine is
disconnected from the mains.
The LATCHING EMERGENCY
STOP BUTTON is located on
the top center of the machine
Figure 8-1
Figure 8-2
Figure 8-3
Original Instruction
Source Document for all related Manuals/Translations
E-Stop Location
Belt Direction
International - ENG
February 2021