3M -Matic 7000a-I Instructions And Parts List page 53

16. Technical Documentation and Information
7000a-I / 7000a3-I Pro Adjustable
Case Sealer, Type 11700
Frame Assemblies
To Order Parts:
1. Refer to first illustration,
Frame Assemblies, for the
Figure Number that identifies
a specific portion of the machine.
2. Refer to the appropriate Figure
or Figures to determine the
parts required and the parts
reference number.
3. The Parts List that follows
each illustration, includes the
Reference Number, Part Number
and Part Description for the parts
on that illustration.
Note – The complete description has
4. Order parts by Part Number,
Part Description and Quantity
required. Also include the
model/machine name, machine
type, and serial number that are
located on the identification plate.
5. Refer to the first page of this
instruction manual "Replacement
Parts and Service Information"
for replacement parts ordering
information.
Important – Not all the parts listed
Contact 3M/Tape Dispenser Parts
to confirm item availability
3M-Matic 7000a-I / 7000a3-I Pro - Type 11700
™
Page 41
44-0009-2164-1 / ECO# 0078045
been included for standard
fasteners and some commer-
cially available components.
This has been done to allow
obtaining these standard
parts locally, if desired.
are normally stocked
items. Some parts or
assemblies shown are
available only on
special order.
Source Document for all related Manuals/Translations
(continued)
Options and Accessories
For additional information on the options and
accessories listed below - contact your
3M Representative.
Part Number
78-8052-6553-1
78-8060-8060-8
70-0067-5966-9
70-0064-4963-4
70-0064-4962-6
70-0064-4965-9
70-0064-4964-2
78-8069-3926-6
70-0064-1097-4
78-8095-4854-4
78-8095-4855-1
70-0064-1104-8
78-8114-0940-4
70-0067-3769-9
Original Instruction
Option / Accessory
Box Hold Down Attachment
Caster Kit Attachment
Conveyor Extension Attachment
AccuGlide™ 3 Upper Taping
Head - 2 inch, Type 10800
AccuGlide™ 3 Lower Taping
Head - 2 inch, Type 10800
AccuGlide™ 3 Upper Taping
Head - 3 inch, Type 10800
AccuGlide™ 3 Lower Taping
Head - 3 inch, Type 10800
Low Tape Sensor Kit
Tape Application Monitor (TAM)
2-Inch Tape Edge Fold
Attachment, Upper Head
2-Inch Tape Edge Fold
Attachment, Lower Head
Tape Application Monitor -
Tape Outboard Kit
3 Flap Folder Kit
Filler Plate - Lower
International - ENG
February 2021