12. Operation
12.1 Operator's Correct Working
12.2 Starting the Machine
12.3 Starting Production
12.4 Tape Replacement and Threading
12.5 Box Size Adjustment
12.6 Cleaning
3M-Matic
7000a-I / 7000a3-I Pro - Type 11700
™
Page 28
44-0009-2164-1 / ECO# 0078045
Position and Operational Flow
(Figure 12-1).
Once the box has been filled,
close its top flaps and push it
between the top and bottom
drive belts. Always keep hands
in position as shown in Figure 12-2.
The box will be automatically
sealed with adhesive tape on
the top and bottom box seams.
Then the box will be expelled on
the exit conveyor.
Important: Before starting the
machine, verify that no
tools or other objects
are on conveyor bed.
Turn the main switch ON (I) after
the EMERGENCY BUTTON is
released (Figure 12-3).
After having adjusted the machine
according to the box dimensions
(height-width), let the machine run
without cartons and check its
safety devices. Then start the
working cycle.
Skill 1 - Operator
See Manual 2 or 3: AccuGlide™ 3
High Speed 2 Inch or 3 Inch
Taping Heads.
Press the LATCHING EMERGENCY
STOP BUTTON.
Repeat all operations shown in
Section 11 -
Set-Up and
Adjustments.
Before carrying out any cleaning
or maintenance operation, stop
the machine by turning OFF (O)
switch on the main and disconnect
electric power (Figure 12-3).
Figure 12-1
Figure 12-2
Figure 12-3
12.7 Table of Operation Adjustments -
Operator Qualifications
1 Tape loading and threading
2 Tape web alignment
3 Adjustment of one way tension roller
4 Adjustment to box size (H and W)
5 Top flap compression rollers
6 Adjustment of tape applying spring
7 Conveyor bed height adjustment
8 Special Adjustment-Changing tape leg length 2
9 Special Adjustment-Column re-positioning
12.8 Safety Devices Inspection
1. Taping units blade guard
2. Latching emergency stop button
3. STOP (OFF) (O) main switch
Original Instruction
Source Document for all related Manuals/Translations
Hand
Position
International - ENG
February 2021
1
1
1
1
1
1
1
2