Spare Parts/Service Information; Recommended Spare Parts; Replacement Parts And Service - 3M -Matic 7000a-I Instructions And Parts List

Spare Parts/Service Information

Recommended Spare Parts

Listed are a set of spare parts that will periodically require replacement due to normal
wear. These parts should be ordered to keep the taping heads in production:
AccuGlide™ 3 Upper Taping Head - 2 inch
Qty.
4
1
1
2
1
AccuGlide™ 3 Lower Taping Head - 2 inch
Qty.
1
2
4
1
1
In addition to the above set of spare parts supplied with the taping head, it is
suggested that the following spare parts be maintained which will require
replacement under normal wear of the taping head.
Qty.
1
1
1

Replacement Parts and Service

Refer to the first page of this instruction manual "Replacement Parts and
Service Information".
3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800
™
Page 19
44-0009-2070-0 / ECO#0078483
Part Number Description
78-8076-4500-3 Stud – Mounting
78-8137-3311-6 Spring – Upper Extension
78-8017-9173-8 Blade – 65mm/2.56 Inch
78-8052-6602-6 Spring – Cutter
78-8076-4726-4 Tool – Tape Threading
Part Number Description
78-8017-9173-8 Blade – 65mm/2.56 Inch
78-8052-6602-6 Spring – Cutter
78-8076-4500-3 Stud – Mounting
78-8137-3312-4 Spring – Lower Extension
78-8076-4726-4 Tool – Tape Threading
Part Number Description
78-8137-1438-9 Roller – Applying
78-8137-1398-5 Roller – Buffing
78-8113-7030-9 Spring – Torsion
Source Document for all related Manuals/Translations
Original Instructions
International - ENG
February 2021