TRENDnet TPE-3012LS User Manual page 154

TRENDnet User's Guide
Select UDLD running mode of interface.
⚫
Disabled: Disable UDLD function.
⚫
Mode Normal: Running on normal mode that port goes to Link
Up One phase after last neighbor ages out.
⚫
Aggressive: Running on aggressive mode that port goes to
Re-Establish phase after last neighbor ages out.
5. Click Apply.
6. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
© Copyright 2020 TRENDnet. All Rights Reserved.
7. Click OK.
TPE-3012LS / TPE-3018LS
150