Configure Multicast Querier Settings - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure multicast querier settings

Multicast > IGMP Snooping > Querier
1. Log into your switch management page (see
on page 11).
2. Click on Multicast, click on IGMP Snooping, and click Querier.
3. Review the settings. Click on Apply to save the configuration changes.
•
State: Check the Enable option to enable IGMP snooping querier for the
selected VLAN. Uncheck to disable IGMP snooping querier for the selected
VLAN.
•
Version: Select the IGMP querier version for the selected VLAN. IGMPv2 or
IGMPv3.
4. Click Apply.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
95