TRENDnet User's Guide
Save DHCP Snooping Database
Security > IP Source Guard > Save Database
This page allow user to configure DHCP snooping database which can backup and
restore dynamic DHCP snooping entries.
1. Log into your switch management page (see
on page 11).
2. Click on Security, click on IP Source Guard, and click on Save Database.
3. Review the settings below.
Item
Description
Select the type of database agent.
•
None: Disable database agent service.
Type
•
Flash: Save DHCP dynamic binding entries to flash.
•
TFTP: Save DHCP dynamic binding entries to remote TFTP
server.
Input filename for backup file. Only available when
Filename
selecting type "flash" and "TFTP".
Select the type of TFTP server.
Address
•
Type
Hostname: TFTP server address is hostname.
•
IPv4: TFTP server address is IPv4 address
Input remote TFTP server hostname or IP address. Only
Server
Addres
available when selecting type "TFTP"
Input delay timer for doing backup after change happened.
Write Delay
Default is 300 seconds.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
Input aborts timeout for doing backup failure. Default is
Timeout
300 seconds.
4. Click Apply.
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK.
TPE-3012LS / TPE-3018LS
126