TRENDnet User's Guide
Save switch configuration to NV-RAM / Restore to default
Management > Configuration > Save Configuration
1. Log into your switch management page (see
on page 11).
2. Click on Management, click on Firmware, and click on Save Configuration.
3. Review the settings below.
Note: After applying configuration changes you must also save configuration the
Running Configuration to NV-RAM/Startup Configuration to ensure the configuration
settings are saved after a switch reboot. Clicking the Save icon in the top right-hand
side of the page will configuration settings to NV-RAM/Startup Configuration.
Item
Description
Source file types
•
Running Configuration: Copy running configuration file to
Source File
destination.
•
Startup Configuration: Copy startup configuration file to
destination.
•
Backup Configuration: Copy backup configuration file to
destination
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
Destination file
Destination
•
Startup Configuration: Save file as startup configuration.
File
•
Backup Configuration: Save file as backup configuration.
Note: Clicking Restore Factory Default will reset all switch configuration settings to
factory defaults.
TPE-3012LS / TPE-3018LS
156