TRENDnet TPE-3012LS User Manual page 36

TRENDnet User's Guide
4. The location name and assigned floorplan image filename will appear in the entry.
© Copyright 2020 TRENDnet. All Rights Reserved.
E-Map View
ONVIF > E-Map Management > E-Map View
This section will allow users to place IP cameras onto the uploaded image floorplans for
visual reference to IP camera installed locations.
1. Log into your switch management page (see
on page 11).
2. Click on ONVIF, click on E-Map Management, and click on E-Map View.
3. Review the settings.
•
Location: The drop-down list will contain a list of uploaded image floorplans
that have been uploaded and already binded to a location name.
•
Map Scale: Scaling adjustment for reference to the physical of objects in the
uploaded floorplan image.
IP Cameras will be available in the left size of the e-map. Using your mouse, drag and
drop the IP cameras to the locations on the floorplan image for reference to the physical
locations. Click Apply.
Note: Clicking Reset will reset the e-map to default and remove all IP cameras from the
floorplan moved back to the top left of the e-map.
4. After completing your configuration changes, click Apply.
5. Click Save in the top left menu to save configuration to NV-RAM.
TPE-3012LS / TPE-3018LS
"Access your switch management page"
32