Configure Rmon Alarm Table - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure RMON Alarm Table

Management > RMON > Alarm
1. Log into your switch management page (see
on page 11).
2. Click on Management, click on RMON, and click on Alarm.
3. Click "Add/Edit" button to Add/Edit an alarm. Review the settings.
Item Description
Port Specify the port for sampling
Specify the counter for sampling
●
Drop Event: Total number of events received in
which the packets were dropped.
●
Received Bytes (Octets): Octets.
●
Received Packets: Number of packets.
Counter
●
Broadcast Packets Received: Broadcast packets.
●
Multicast Packets Received: Multicast packets.
●
CRC and Align Error: CRC alignment error.
●
Undersize Packets: Number of undersized
packets.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
●
Oversize Packets: Number of oversized packets.
●
Fragments: Total number of packet fragment.
●
Jabbers: Total number of packet jabber.
●
Collisions: Collision.
●
Frames of 64 Bytes: Number of packets size 64
octets.
●
Frames of 65 to 127 Bytes: Number of packets
size 65 to 127 octets.
●
Frames of 128 to 255 Bytes: Number of packets
size 128 to 255 octets.
●
Frames of 256 to 511 Bytes: Number of packets
size 256 to 511 octets.
●
Frames of 512 to 1023 Bytes: Number of packets
size 512 to 1023 octets.
Sampling Specify the sampling type.
●
Frames Greater than 1024 Bytes: Number of
●
Absolute: The selected variable value is
packets size 1024 to 1518 octets.
compared directly with the thresholds at the end
of the sampling interval.
●
Delta: The selected variable value of the last
sample is subtracted from the current value and
the difference is compared with the thresholds.
Interval Specify the sampling interval.
Specify the owner for the sampling.
Owner
Specify the type for the alarm trigger.
Trigger
RISING
TPE-3012LS / TPE-3018LS
169