Table of Contents
Advertisement
TRENDnet User's Guide
Overview
Overview
The overview page will provide a display of the front panel and icons representing
connected devices or links. Additinally, this page will display specifically if IP cameras are
connected or other links and also display the data link speed the devices are connected.
PoE can also be enabled or displayed on each port.
1. Log into your switch management page (see
on page 11).
2. Click on TPE-3012LS or TPE-3018LS (depending on the switch model) in the top left
and click the Overview tab.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management
page"
Port Number
Amber: 10/100Mbps
Green: Gigabit
Note: The switch will scan for connected device every 30 seconds. Additionally, the green
colored ports on the front indicate which ports are PoE and blue which ports are data
ports only.
TPE-3012LS / TPE-3018LS
Icons will indicate
whether the device is an
IP camera or other.
PoE On/Off Button: Click
the port PoE button to
turn PoE on or off.
On
Off
14
Advertisement
Table of Contents
