TRENDnet User's Guide
Product Hardware Features
Gigabit PoE+ Ports
Reset Button
Reset Button – Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will display Amber and
then turn off to indicate that the reset was initiated.
Gigabit Ethernet PoE+ Ports (1‐8) – Connect either network PoE+ or
non‐PoE devices.
© Copyright 2018 TRENDnet. All Rights Reserved.
Front View
Rear View
AC Power Port
LED Indicators
The desktop PoE managed switch includes LED indicators that convey port status
Diagnostic LEDs
Power LED
On
Off
PoE MAX (Power over Ethernet Max.)
On
Off
When the Power LED is on, the device is receiving power.
When the Power LED is off, the power adapter is not
connected or the device is not receiving power.
When reaching near the max PoE power budget provided
64W or above, the LED will turn on and the system will not
provide power additional PD (PoE client devices) after max
PoE budget is reached.
When the PoE power provided is below the 57W PoE
power budget.
TPE‐TG82ES
2