Udld - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide
© Copyright 2020 TRENDnet. All Rights Reserved.

UDLD

Diagnostics > UDLD > Property
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics, click on UDLD, and click on Property.
3. Review the settings below.
Item Description
Message Time Input the interval for sending message. Range is 1 -90
seconds.
Port Display port ID of entry.
Mode Display UDLD running mode of interface.
Bidirectional Display bidirectional state of interface.
State
Operational Display operational status of interface.
Status
Neighbor Display the number of neighbor of interface.
4. In the table, select the port to configure for UDLD and click click Edit.
Item Description
Port Display selected port to be edited.
TPE-3012LS / TPE-3018LS
"Access your switch management page"
149