Configure Port Mirroring - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Configure Port Mirroring

Diagnostics > Mirroring
1. Log into your switch management page (see
on page 11).
2. Click on Diagnostics and click on Mirroring.
3. In the table, select the session to configure for port mirroring and click Edit.
4. Review the settings below.
Item Description
Session ID Selected mirror session ID.
Select mirror session state : port-base mirror or disable
•
State
Enabled: Enable port based mirror
•
Disabled: Disable mirror.
Monitor Select mirror session monitor port, and select whether
Port normal packet could be sent or received by monitor port.
Select mirror session source rx ports.
Ingress
port
Egress port Select mirror session source tx ports.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
5. Click Apply.
6. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
7. Click OK.
TPE-3012LS / TPE-3018LS
144