TRENDnet TPE-3012LS User Manual page 9

TRENDnet User's Guide
•
Diagnostic LED Indicators
SYS LED
On : The device is receiving power.
Blinking : The device is booting up.
Off : The device powered off or not receiving power.
PoE Alert
On : When reaching near the max PoE power budget provided
200W or above, the LED will turn on to indicate that PoE
power consumption is near max. budget available.
Off : When the PoE power provided is below the 200W PoE
power budget.
PoE+ Gigabit Ports (1-16)
On : When the Link/ACT LED lights on, the respective
port is successfully connected to an Ethernet
network.
Green/Amber Green indicates the link is connected at 1000Mbps.
Amber indicates the link is connected at
10/100Mbps.
Blinking : When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet
network.
Off : No link.
PoE (Power over Ethernet)
Green : When the PoE powered device (PD) is connected and the
port supplies power normally.
Off No PoE powered device (PD) connected or unplugged the
PoE output port.
Gigabit Ports (17-18)
On : When the Link/ACT LED lights on, the respective
port is successfully connected to an Ethernet
network.
Green/Amber Green indicates the link is connected at 1000Mbps.
Amber indicates the link is connected at
© Copyright 2020 TRENDnet. All Rights Reserved.
10/100Mbps.
Blinking : When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet
network.
Off : No link.
SFP Slots Shared (17F-18F)
Green on : When the mini-GBIC Green LED lights on, the
respective port is inserted mini-GBIC Gigabit
module.
Green blinking : When the mini-GBIC Green LED is blinking, the port
is transmitting or receiving data on the Gigabit
network.
When the mini-GBIC Amber LED lights on, the
Amber on
respective port is inserted mini-GBIC 100Mbps
module.
Amber blinking When the mini-GBIC Amber LED is blinking, the
port is transmitting or receiving data on the
Ethernet network.
Off No link
TPE-3012LS / TPE-3018LS
5