1. Before You Start Package Contents TPE-082WS Ÿ Quick Installation Guide Ÿ CD-ROM (Utility and User's Guide) Ÿ Power adapter Ÿ Rack mount kit Ÿ Minimum Requirements Computer with an Ethernet port and web browser Ÿ Network cable Ÿ Optional Equipment EIA standard 19”...
2. Hardware Installation and Configuration TPE-082WS 3. Assign a Static IP address to your computer's network adapter in the subnet of 192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0. 4. Open your web browser, type the IP address of the switch in the address bar, and then press Enter.
5. Enter the User name and Password, and then click Login. By default: User Name: admin Password: admin Note: User Name and Password are case sensitive. 6. Click System and then click IPv4 Setup. 7. Configure the switch to match the requirements of your network. Then click Apply to save changes.
IP address, change password, then install the Web Smart Switch Management Utility. Follow the steps provided on the user's guide. 2. To download the latest version of the user's guide and the utility, please go to http://www.trendnet.com/support and select the TPE-082WS within the Products Download dropdown list.
Page 7
Product Name: 10-Port Gigabit Web Smart PoE+ Switch Trade Name: TRENDnet TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 55032:2012+AC: 2013 (CISPR32:2012) (Class A)
Page 8
Product Warranty Registration If you have any questions regarding the product Please take a moment to register your installation, please contact our Technical Support. product online. Go to TRENDnet’s website at: Toll free US/Canada: 1-866-845-3673 www.trendnet.com/register Regional phone numbers available at www.trendnet.com/support...