Changing The Onvif Device Administrator Password - TRENDnet TPE-3012LS User Manual

TRENDnet User's Guide

Changing the ONVIF device administrator password

ONVIF > Device Authentication
After ONVIF compliant devices have been discovered and successfully authorized, you
can change the ONVIF administrator password of the ONVIF compliant devices.
1. Log into your switch management page (see
on page 11).
2. Click on ONVIF and click on IPC Discover.
3. For the ONVIF devices that have been successfully authorized, check the device in the
list and click Account.
4. Under the IP Camera List section below, a list of the current user accounts of the
ONVIF device will be listed. To modify the ONVIF administrator password, check the
device in the list with User Level admin and click Edit.
© Copyright 2020 TRENDnet. All Rights Reserved.
"Access your switch management page"
5. Scroll down to the Edit User Account section and you can enter in the administrator
password settings in the password fields provided.
Note: Please note that the ONVIF user password typically requires eight characters for
accounts.
6. After you have applied configuration changes, scroll to the bottom of the window and
click Apply. A success message will appear if the configuration changes were
successfully applied.
TPE-3012LS / TPE-3018LS
28