Configuration; Backup And Restore Your Switches Configuration Setting - TRENDnet TEG-S80ES User Manual

TRENDnet User's Guide
5. Depending on your web browser, click Browse or Choose File and navigate to the
folder on your computer where the unzipped firmware file (.bin) is located and select
it.
Note: While the switch in the upgrade state, you will not be able to access the
management interface until you reboot the device.
6. Click Upgrade. If prompted, click Yes or OK.
© Copyright 2018 TRENDnet. All Rights Reserved.

Configuration

Backup and Restore your switches configuration setting

Tools > Configuration
You may have added many customized settings to your switch and in the case that you
need to reset your switch to default, all your customized settings would be lost and
would require you to manually reconfigure all of your switch settings instead of simply
restoring from a backed up switch configuration file. The configuration will be backed up
or restored only to the currently used image.
To back up your switch configuration:
1. Log into your switch management page (see
on page 7).
2. Click on Tools, click on Configuration.
3. Click Backup to save the configuration file (config.bin) to your local hard drive.
Note: The configuration file (config.bin) will be saved to your default downloads folder.
To restore your switch configuration:
1. Log into your switch management page (see
on page 7).
2. Click on Tools, click on Configuration.
3. Next to Select File, depending on your web browser, click on Browse or Choose File.
4. A separate file navigation window should open.
5. Select the switch configuration file to restore and click Restore. (Default Filename:
config.bin). If prompted, click Yes or OK.
6. Wait for the switch to restore settings.
TEG-S80ES
"Access your switch management page"
"Access your switch management page"
46