4 Operating the System
WARNING!
The operator must always have supervision of the System.
4.1 Turn On The System
The system is ready for examination within two minutes after the system has been turned on.
• Before starting the system, check that the emergency stop is not activated.
When the system starts up, light indications and displays are lit.
• Perform the following procedure when starting up the X-ray system:
A
Fig. 4-1 Power on button – mini console
Operator´s Manual
O
N
O
FF
1000-095-071-EN Rev. 2.1
Page 91
Operating the System
Turn On The System
1. Press the power [ON] button (A) on the
mini console.
OMNERA 500A