User Interface
Automatic Collimator Control
3.2.1.6 Collimator Control Handle, Table (option)
A
Fig. 3-7 Table collimator control handle
3.2.1.7 Hand Control, Wallstand – Collimator Adjustment
B
C
Fig. 3-8 Hand control
OMNERA 500A
E
F
B
C
D
A
C
B
1000-095-071-EN Rev. 2.1
Page 50
A. Button for switching the light and the
laser line on/off. The light and laser line
is automatically switched off via a time
switch.
B. Button for changing between Automatic
mode and Manual mode.
A long activation of the M button sets the
light field to max image size, based on
the pre-programmed SID value and the
selected receptor.
C. Button for closing the format height
collimation.
D. Button for opening the format height
collimation.
E. Button for opening the format width
collimation.
F. Button for closing the format width
collimation.
A. Collimator light on/off
B. Adjustment height collimation
C. Adjustment width collimation
Operator´s Manual