Operation; Turning On The Power Of The System; Turning Off The Power Of The System; Calibration - Canon CXDI-50G User Manual

4. Operation

4.1 Turning ON the Power of the System

(1) Turn ON the power of the power box.
(2) Turn ON the remote switch if it is connected to the power box.
(3) Turn ON the power of the control PC and start the system.

4.2 Turning OFF the Power of the System

NOTE: Never turn OFF the power of the control PC during shutting down the system.
Otherwise, it may result in malfunction, damage of the product, or loss of data.
(1) Shut down the system by referring to the CXDI Control Software Operation Manual.
(2) After the system shuts down, the power of the control PC automatically turns OFF.
Check that the power of the control PC has turned OFF.
(3) Turn OFF the power of the power box and remote switch.
(4) Turn OFF the power of other units.

4.3 Calibration

Calibration is important to ensure that a good image is achieved with the CXDI-50G by
obtaining the calibration data of the sensor unit. Perform calibration when exposure condi-
tions have changed significantly.
For procedure for calibrating, refer to "Calibrating the Instrument" in the CXDI Control
Software Operation Manual.
– 7 –