Attach/Remove Accessories - Canon OMNERA 500A Operator's Manual

3.8.9 Attach/Remove Accessories

Accessories are attached and removed as shown in the figures below. This instruction is
valid for all accessories attached to the table top.
1
2
3
Fig. 3-55 Attach accessories
1
2
3
Fig. 3-56 Remove accessories
Operator´s Manual
A
B
1000-095-071-EN Rev. 2.1
Page 85
User Interface
Table Control elements
• To attach:
1. Insert the accessory.
2. Rotate it downwards.
3. Click to attach at A.
• To remove:
1. Press on the accessory at B.
2. Rotate it upward.
3. Remove the accessory.
OMNERA 500A