Table of Contents
Advertisement
Operating the System
Portable detector, table
2. Insert the detector into the tray as shown below.
3. In this position exposure is possible in Free mode, Table Flexible mode and Auto position
mode.
4. Press and hold the button of the tray and push it in.
To check if the detector is in the right position, see the "STATE" ; Detector position/
present/undefined at the display.
OMNERA 500A
Fig. 4-48 Inserting the detector into the detector tray
Fig. 4-49
Fig. 4-50 Reinserting the detector tray
1000-095-071-EN Rev. 2.1
Page 126
Operator´s Manual
Advertisement
Table of Contents
