Table of Contents
Advertisement
User Interface
Display User Interface
3.3.7.1 Selection of Active AEC Field (AEC Mode Only)
1. Activated AEC fields
2. Pop-up window for selecting AEC fields
The AEC field selection button is available in AEC mode.
When selecting the AEC field button, a pop-up-window with the different AEC fields appears,
see Fig. 3-35.
The AEC fields are activated by selecting them in the pop-up window 2 to the right.
All activated AEC fields are shown at 1.
AEC fields are deactivated by selecting them again in the pop-up window 2.
OMNERA 500A
1
Fig. 3-35 AEC field selection
1000-095-071-EN Rev. 2.1
Page 68
2
Operator´s Manual
Advertisement
Table of Contents
