Table of Contents
Advertisement
Operating the System
Free Examination Procedures
4.7 Free Examination Procedures
4.7.1 Free Mode
4.7.1.1 General
The Free mode is designed for emergency examinations. The servo button cannot be
activated in Free mode, consequently no automatic movement is available.
4.7.1.2 Flow of Operation
Fig. 4-22 Free mode display
• The stand shows H, distance to the floor.
• All movements are available.
4.7.1.3 Exposure
Exposure is possible when the overhead tube crane is not moving.
Note!
The overhead tube crane enters automatically the "Free mode" at start-up.
4.7.2 Auto Position Mode
4.7.2.1 General
The Auto position mode is designed for emergency examinations or examination with a
mobile detector.
4.7.2.2 Pre-defined Auto Positions
When the auto position mode is selected, the overhead tube crane is go to a predefined
position in the room.
OMNERA 500A
Select a Free mode examination.
The System display shows the following,
see Fig. 4-22.
1000-095-071-EN Rev. 2.1
Page 106
Operator´s Manual
Advertisement
Table of Contents
