User Interface; Overhead Tube Crane; Direction Of Movement; Sound Signal - Canon OMNERA 500A Operator's Manual

3 User Interface

3.1 Overhead Tube Crane

The overhead tube crane (OTC) can be moved to the correct position by autopositioning,
motorized movements or manual movements.
The overhead tube crane has a display that shows patient information, information of the
tube angulation and the selected workstation, etc. The exposure parameters are shown and
can easily be changed from the OTC.

3.1.1 Direction of Movement

Fig. 3-1 shows the movements of the overhead tube crane.
Z
0
Z
Y
X

3.1.2 Sound Signal

• One sound signal means that the overhead tube crane is in position and ready for
exposure.
• Two sound signals, in rapid succession, indicates a fault and the display shows an error
message, for example after a collision. The error message shows the corrective action.
Operator´s Manual
Y
X
Fig. 3-1 OTC direction of movement
Vertical movement
Lateral movement
Longitudinal movement
1000-095-071-EN Rev. 2.1
Page 45
Overhead Tube Crane
Alpha
Beta
Motorized
Motorized and manual
Motorized and manual
User Interface
OMNERA 500A