Operating the System
Perform Examination
4.3.5 Exposure
WARNING!
Check that the settings of the SID (Source Image Distance) are accurate before the
exposure.
WARNING!
Check that the selected workstation (wallstand, table) is connected and linked
properly at the Examination Check screen of the image system before the exposure.
WARNING!
Check that the X-ray tube is set at correct position before the exposure.
CAUTION!
It is the responsibility of the user to ensure that the X-ray field is within the active
detector area when exposing.
CAUTION!
Materials located in the X-ray beam may cause adverse image effects.
Note!
The operator is responsible for verifying the exposure parameters before exposure.
OMNERA 500A
1000-095-071-EN Rev. 2.1
Page 98
Operator´s Manual