Table of Contents
Advertisement
Appendix B
Monthly Checklist
13.1.1.1 General
Checks for All Units Overhead Tube Crane, Table and Wallstand
1. Make sure that the Operation Manual is available and up
2. Check the hoses for damage.
3. Check all outer cabling for damage.
4. Clean all outer surfaces, except for the lubricated column
5. Check the emergency stop.
13.1.1.2 Overhead Tube Crane
6. Power up the Ceiling suspended unit and check all
7. Move the Ceiling suspended unit around and observe
13.1.1.3 Table
8. Move the Table in X, Y and Z direction an make sure it
9. Move the Table top in longitudinal direction and check
13.1.1.4 Wallstand
10. Move the wallstand up and down in Z direction and make
OMNERA 500A
to date.
segments. See Operation Manual, Chapter 6 "Cleaning",
for cleaning instructions.
By activating the emergency stop, all motorized
movements are inhibited. See Chapter 2, "Safety", for
information of how the Emergency stop should react on
command.
functions.
any irregularities.
runs smoothly and without any dissonance.
that the mechanical end stops are not loose.
sure it runs smoothly and sounds OK.
1000-095-071-EN Rev. 2.1
Page 164
Operator´s Manual
Advertisement
Table of Contents
