Servo State Mode - Canon OMNERA 500A Operator's Manual

3.3.10 Servo State Mode

Auto
A
Fig. 3-40 Servo state mode
A Automatic mode
B Manual mode
Operator´s Manual
B
1000-095-071-EN Rev. 2.1
Page 71
User Interface
Display User Interface
The Servo state can be either Automatic
mode A or Manual mode B.
A pop-up window according to Fig. 3-40
appears with two alternatives. When the
System is in Manual mode all movements
are allowed and exposure can be
performed in any position, also outside the
detector.
For further information about Manual mode,
see corresponding section.
OMNERA 500A