Table of Contents
Advertisement
Technical specification
Ceiling Suspended X-Ray Tube Support
9.7 Ceiling Suspended X-Ray Tube Support
9.7.1 General
Rotation range ceiling (beta)
Rotation range tube arm (alpha)
Column (Z stroke)
9.7.2 Configuration
Overhead tube crane
9.7.3 Weight
Total weight Overhead tube crane
(4x4m traverse and ceiling rail) including
cabling
Overhead tube crane (including tube and
collimator, ceiling wagon, column)
Traverse (X-ray assembly, 4 m)
Ceiling rail Y (4 m standard)
9.7.4 Electrical Characteristics
Mains voltage
9.7.5 Classification
Classification according to IEC 60601-1.
Class
Applied part
Protection against ingress of water
Mode of operation
Use of anaesthetic mixtures
OMNERA 500A
>340°
>±135°
1750 mm
The overhead tube crane is a mechanical
part of an X-ray system.
340 kg
165 kg
95 kg
28 kg/each
230 VAC, 50/60 Hz center tapped single
phase 4 A
Class I equipment. All dead metal parts of
the equipment are electrical connected to
protective earth.
Type B
IPXO
Intermittent operation: 20%, maximum 1
min. ON / 4 min. OFF
The equipment is not suitable for use in the
presence of flammable anaesthetic
mixtures with air or with oxygen or with
nitrous oxide.
1000-095-071-EN Rev. 2.1
Page 150
Operator´s Manual
Advertisement
Table of Contents
