Advertisement
20.3 Preventive Maintenance Performed by the User
20.3.1 Cleaning the system
AcAUTION:
1. Before cleaning the system, be sure to disconnect the
system power plug from the outlet of the facility.
NOTICE:
If the system is defective, an electric shock may occur.
2. Do not spill or spray liquids such as water onto the system
or peripheral units. If a liquid such as water enters the
system or peripheral units, an electric shock may occur.
Do not use solvents (such as paint
thinner, benzine,
or alcohol) or
abrasive cleansers to clean the
system.
These substances may cause
deterioration or discoloration of the system.
Cleaning the transducer
Clean, disinfect, and sterilize the transducer referring
to the operation manual provided with the
transducer.
2
Cleaning the transducer holder and gel holder
(a) Wipe off any stains on the transducer holder
and gel holder using a
soft,
dry cloth.
{b) If it is difficult to remove stains, wipe them off
using a soft cloth moistened with mild
detergent.
~I~
'JC771 1 A 1 C~l*I I
Advertisement
