Table of Contents
Advertisement
22
OPERATING THE TRACTOR
2. Selecting light switch positions.
BHead Light Switch
Turn the light switch clockwise, and the following lights are
activated on the switch position.
(1) Head light switch
(2) High beam indicator
Light name
Head light(Low beam)
Head light(High beam)
Tail light
Registration plate light
Sidemarker light
Meter board light
A High beam indicator will be on when head light switch
is in "high beam" position.
Switch Position
(A)
(B)
(C)
OFF
ON
---
OFF
---
ON
OFF
ON
ON
OFF
ON
ON
OFF
ON
ON
OFF
ON
ON
BTurn Signal / Hazard Light Switch
C Hazard Light
1. When the hazard light switch is pushed, the hazard
lights flash, along with the L/H and R/H indicators on
the instrument panel.
2. Push the hazard light switch again to turn off the
hazard lights.
C Turn signal light
To indicate a right turn, turn the turn signal light switch
clockwise. To indicate a left turn, turn the turn signal light
switch counter-clockwise. The corresponding right and
left turn signal lights and indicator on the instrument panel
will flash.
A The hazard light switch is operative when the key
switch is in either the "ON" or "OFF" position.
A The turn signal light switch is only operative when the
key switch is in the "ON" position.
A Be sure to return the turn signal switch to center
position after turning.
(1)Hazard light switch
(2)Turn signal light switch
(3)Hazard / Turn signal indicator
(A) "RIGHT TURN"
(B) "LEFT TURN"
Advertisement
Table of Contents
